11
PERSONAL PROTECTIVE EQUIPMENT
1.
2.
3.
4.
Always wear impact safety goggles that provide front and side protection for the eyes.
Eye protection equipment should comply with CSA Z94.3-07 or ANSI Z87.1 standards,
depending on the type of work that is performed.
Wear gloves that provide protection from the work materials or to reduce the effects
of tool vibration.
Wear protective clothing designed for the work environment and tools.
Non-skid footwear is recommended to maintain balance in the work environment.
SPECIFIC SAFETY PRECAUTIONS
PERSONAL PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from repeated
use) replace strict adherence to the tool’s safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injuries.
Control the tool, personal movement, and the work environment to avoid personal injury
or damage to the tool.
1.
2.
Do not operate any tool when tired or under the influence of drugs, alcohol, or
medications.
Avoid wearing clothes or jewelry that can become entangled with the moving parts
of a tool. Keep long hair covered or bound.
WARNING! Direct exposure of pressurized air or fluids to skin could result in severe bodily
injuries.
1.
2.
3.
4.
Use the correct tool for the job. This tool was designed for a specific function. Do not
modify or alter this tool or use it for an unintended purpose.
Ensure that the reel is properly installed before connecting the input and output air
hoses.
Remove system pressure immediately if a leak occurs in the hose or reel, or if the reel
ceases to wind and unwind.
Release the hose slowly and control it as it retracts.
To Next Page
Loading...
