Giropes BAXTRAN BR16 - Warranty

ENUSER’S MANUAL BR16
64
*Introducethegravityofyourzonebeforedoingthefirstcalibration.
*Introducethegravityofdestinationafterdoingthecalibration.
*Thevalueofthegravitywillbedeniedifitisbiggerthan9.83217(gravityofthepole)orinferiorto9.78031(gravityofthe
equator).
Valueoffactory: 9.8035
DISPLAY DESCRIPTION AND SEQUENCE OF USE
• Pressthekey tocontinueorthekey toexitfromthemenuandthescalewillstartagain
automatically.
LF 7
-00- •Thescreenisgoingtoshowthenumberofpre-calibrationduringonesecond.
9.8035 • Pressthekey to continue.
9.8035
• Usethekeys , and ,0 ~ 9 andthenthekey to introduce the value of
gravity(pressESCtoexitfromtheconfigurationandgobacktothemenuLF7)
INITIAL ZERO LF 8
SEtZ Yresetsofthepointofzeroeverytimethatthescaleisbegunagain.
SEtZ nresetsofthepointzeroOFF
DISPLAY DESCRIPTION AND SEQUENCE OF USE
• Pressthekey tostartorthekey toexitfromthemenuandthescalewillstartagain
automatically.
LF 8
• Usethekey andthenthekey tochoosethemodeofzeroinitial(pressthekey…toexit
fromtheconfigurationandgobacktothemenuLF8)
SetZ Y
LF 8
• Usethekeys , andthenthekey tocontinuewithotheradjustmentsopressthekey
toexitfromthemenuandthescalewillstartagainautomatically.
11. GUARANTEE
Thisscalehasawarrantyagainstallmanufactureandmaterialdefects,foraperiodofayearstartingwiththedeliverydate.
Duringthisperiod,GIROPES,willbeinchargeoftherepairingofthescale.
Thiswarrantydoesnotincludethedamagesdonebyoverloadorwronguse.
Thewarrantydoesnotcoverthedeliveryexpensesnecessaryfortherepairofthescale.