Need help?Do you have a question about the GL-INET Brume and is the answer not in the manual?
Plug the USB Type-C power cable into the power port of the router.
Connect your device to the router via Ethernet cable or USB Type-C cable.
Open a web browser and visit http://192.168.8.1 to access the router's administration interface.
Connect the router to the modem or main router via Ethernet cable.
Connect to the internet using a USB 3G/4G modem with a SIM card.
Share smartphone network with the router using a USB cable.
Extend existing wireless network coverage by connecting the router.
Configure 2.4G WiFi name (SSID), security, and password.
List of supported dongles for adding Wi-Fi functionality.
View and manage connected devices, monitor traffic, and block clients.
Check for and download newer firmware versions directly from the internet.
Upload a firmware file to the router from your computer.
Enable automatic firmware updates at scheduled times.
Allow remote access to specific services behind the firewall.
Make router services publicly reachable by opening specific ports.
Expose a computer to the internet by redirecting inbound packets.
Configure OpenVPN client or server using .ovpn files.
Set up WireGuard client or server for fast, secure VPN connections.
Define routing policies for specific websites or IPs to use VPN.
Install or remove OpenWrt packages to extend router functionality.
Ensure internet access only via VPN by disabling it if VPN fails.
Share external storage device contents over the network.
Enable the router as a DLNA server for media streaming.
Map a domain name to the router's dynamic IP address.
Change the password for the web admin panel.
Set or change the router's local IP address.
Clone a client's MAC address to the router for network access.
Configure custom DNS servers for privacy and to prevent leaks.
Choose router mode: Router, Access Point, Extender, or WDS.
Understand the status indications provided by the router's LEDs.
Steps to repair the network or reset the router to factory defaults.
Recover a bricked router using the Uboot failsafe method.
Configure the WAN port to function as an additional LAN port.
Troubleshoot and resolve problems accessing the router's web admin panel.
Fix devices showing 'Deactivated' in GoodCloud by ensuring connectivity.
To Next Page
General
