3. WIRELESS
In WIRELESS, you can check the current status and change the settings of the
wireless network created by the router. The wireless network can be turned on or
off by switching the ON/OFF button.
Wi-Fi Name (SSID): The name of the Wi-Fi. It is not suggested to use unicode
characters such as Chinese.
Wi-Fi Security: The encryption method of the Wi-Fi.
Wi-Fi Key: The password of the Wi-Fi, which must be at least 8 characters long.
We suggest you change it when you receive the router.
SSID Visibility: Show or hide the SSID.
Wi-Fi Mode: Wi-Fi protocol standards. It supports 802.11/b/g/n. It is suggested
to use the default 802.11b/g/n or select a Wi-Fi mode based on your demand.
Bandwidth: The bandwidth is the Wi-Fi channel frequency coverage range.
Select 20/40MHz or 40MHz or 20MHz based on your demand.
Channel: The router will not choose the best channel by default. You will need
to select a channel manually. If your router is used as a Wi-Fi repeater, the
channel will be fixed according to the connected wireless network.
TX Power (dBm): It specifies the signal strength. It has 4 levels, Max, High,
Medium, Low. Default setting is Max.
To Next Page
Loading...
Need help?
General
