GL-INET GL-AX1800 User Manual

Let’s get
started.
GL-AX1800 / Flint
AX1800 Wireless Router
Set Up Router
Visit http://192.168.8.1 in your browser to set
up your router; start by choosing your preferred
language.
Power On
When powered up, your router will broadcast
both 2.4G and 5G Wi-Fi signal with the SSID:
GL-AX1800-xxx and GL-AX1800-xxx-5G.
or
Default password is goodlife
Search the SSID and connect to it
Connect to the Wi-Fi called GL-AX1800-xxx,
and then input the default Wi-Fi password
goodlife, which is also printed on the bottom
of the router.
Connect via Wi-Fi
Connect via LAN
Plug the cable connecting
to your computer into LAN port
Plug in power cable
SETTING UP

GL-INET GL-AX1800 Specifications

General

Model	GL-AX1800
Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Maximum Wi-Fi Speed	1800 Mbps
USB Ports	1 x USB 3.0
RAM	512 MB
Antennas	4 x External Antennas
Power Input	12V/1A
Weight	300 g
Operating System	OpenWrt
Frequency Bands	Dual Band (2.4 GHz and 5 GHz)
Ethernet Ports	1 x WAN, 3 x LAN
Processor	Qualcomm IPQ6000
VPN Support	Yes
Flash Memory	128MB

Summary

Setting Up Your Router

Power On

When powered up, the router broadcasts 2.4G and 5G Wi-Fi signals.

Connect via Wi-Fi

Connect to the GL-AX1800-xxx Wi-Fi and use the default password.

Connect via LAN

Connect your computer to the router's LAN port using a cable.

Router Setup Portal

Access http://192.168.8.1 in your browser to configure the router.

Support and Warranty

Repair and Reset

Press the Reset button for 3 seconds to repair or 10 seconds to reset to factory settings.

Technical Support Resources

Visit docs.gl-inet.com for instructions, or contact via email, Facebook, or forum.

Warranty Information

Details on the one-year limited warranty for routers and 3-month for accessories.