Need help?Do you have a question about the GL-INET GL-AR300M16-Ext and is the answer not in the manual?
General| Model | GL-AR300M16-Ext |
|---|---|
| Category | Network Router |
| Flash Memory | 16MB |
| Wireless Standard | 802.11b/g/n |
| Wireless Speed | 300Mbps |
| Frequency Band | 2.4GHz |
| USB Port | 1 x USB 2.0 |
| Power Input | 5V/2A |
| Operating System | OpenWrt |
| Dimensions | 58 x 58 x 25mm |
| Antennas | 2 |
| Ethernet Ports | 2 |
Plug the Micro USB power cable into the power port of the router using a standard 5V/1A power adapter.
Search for the router's SSID and input the default password 'goodlife' to establish a Wi-Fi connection.
Set a secure password (min 5 characters) for the router's Admin Panel.
Connect the router to a modem or main router using an Ethernet cable for internet access.
Configure the router to automatically obtain an IP address via DHCP for cable connection.
Manually configure IP address, Netmask, and Gateway for a static cable connection.
Set up a PPPoE connection for internet access using ISP-provided username and password.
Connect to the internet using a USB 3G/4G modem with a SIM card.
Set up OpenVPN server and client functionality on the GL.iNet router.
Generate and configure an OpenVPN server on the router.
Configure the OpenVPN client by uploading a .ovpn configuration file.
Configure and utilize WireGuard for fast and modern VPN connections.
Set up a WireGuard server and create new user profiles.
Set up a WireGuard client by adding profiles and inputting server configurations.
Guide to setting up Shadowsocks server and client on GL.iNet routers.
Configure the Shadowsocks server port, password, and encryption method.
Change the router's Admin Panel password for enhanced security.
Reset the router to factory settings, erasing all configurations and data.
To Next Page
