Glacier bay 1009 507 829 User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

THANK YOU

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this food waste

disposer. We strive to continually create quality products designed to enhance your home. Visit us online to see our

full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

IM-GB-231

USE AND CARE GUIDE

FOOD WASTE DISPOSER

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER

HOMEDEPOT.COM/GLACIERBAY

Item #

1009 507 802

1009 507 805

1009 507 819

1009 507 829

Model #

GB333

GB500

GB750-SL

GB1000-SL

Table of Contents

Questions and Answers:

R
Rebecca FergusonAug 11, 2025
What to do if my Glacier Bay Garbage Disposal unit does not start?
- A
  Amanda WilliamsAug 11, 2025
  If your Glacier Bay Garbage Disposal doesn't start, there might be a jam. First, unplug the power cord or switch off the wall switch or breaker. Then, remove the stopper and splash guard. Check if the turntable can rotate freely using a wooden broom handle. If it does, replace the splash guard and check the reset button to see if it's tripped. The reset button is red and located on the front of the disposal. Push it in until it clicks and stays depressed. If the reset button hasn't tripped, check for shorted or broken wires. Also, check the electrical power switch, fuse box, or circuit breaker. If wiring and electrical components are intact, the unit may have internal problems that require service or replacement.
M
Manuel RochaAug 18, 2025
How to fix loud noises from Glacier Bay Garbage Disposal?
- K
  Keith EvansAug 18, 2025
  Loud noises from your Glacier Bay Garbage Disposal (besides the normal grinding sounds) are usually caused by a foreign object, like a spoon or bottle cap, that accidentally fell inside. To fix this, turn off the electrical switch and water supply. Once the disposal has completely stopped, remove the splash guard. Use long-handled tongs to carefully remove the object. After removing the object, replace the splash guard.
P
pnelsonAug 25, 2025
Why is my Glacier bay 1009 507 829 unit leaking at the top?
- D
  Danny JohnsonAug 26, 2025
  If your Glacier Bay Garbage Disposal leaks at the top, it could be due to improper seating of the sink flange, which includes issues with the gasket centering, putty, or tightening. Try adjusting the seating of the sink flange. Another cause might be the support flange not being tightened properly; in this case, tighten the support flange. Lastly, a defective or improperly installed cushion mount could be the culprit; adjust the cushion mount installation or replace it.
J
Jasmine FoleySep 1, 2025
What to do if the turntable of my Glacier bay 1009 507 829 does not rotate freely?
- J
  John MejiaSep 1, 2025
  If the turntable of your Glacier Bay Garbage Disposal doesn't rotate freely, there is likely a jam. Turn off the disposal and check for any foreign object stuck between the turntable and the grind ring. Try to dislodge the object by rotating the table with a wooden broom handle and then remove the object. If you don't find any foreign objects, the disposal may have internal problems.

Glacier bay 1009 507 829 Specifications

General

Model Number	1009 507 829
Category	Garbage Disposal
Brand	Glacier Bay
Motor Speed	1725 RPM
Feed Type	Continuous
Grind Stages	1
Voltage	120 V
Material	Stainless Steel

Summary

Safety Information

General Safe Operation Practices

Follow key instructions for safe handling, clearing jams, and general use.

Prohibited Materials and Electrical Safety

Avoid grinding specific materials and ensure proper electrical grounding and cord care.

Pre-Installation

Planning Installation

Package Contents

Installation Steps

Disassembling the Mounting Assembly

Installing the Mounting Assembly

Attaching the Disposer

Securing the disposer unit to the mounting assembly.

Attaching the Discharge Elbow

Connecting the Dishwasher Hose

Making Electrical Connections

Guidance for connecting the disposer to household power using a plug or permanent wiring.

Permanent Wiring Electrical Connections

Detailed steps for removing the power cord and making permanent electrical connections.

Operation

Continuous Feed Operation

Instructions for using the disposer with continuous cold water flow.

Tips for Successful Operation

Troubleshooting

Troubleshooting Common Problems

Identifies common issues like loud noises, unit not starting, leaks, and provides solutions.

Related product manuals

Glacier bay 1009 507 805

Preview: Glacier bay GB333

Glacier bay GB333

Glacier bay GB500

Glacier bay GB1000-SL