To Next PageTo Next PageWhy is the handle hard to turn on my Glacier bay ARAGON HD833X-0101?
If the handle is hard to turn, the bonnet nut may be too tight. Loosen the bonnet nut and reinstall it, being careful not to overtighten it.
How to fix leaking or dripping from the spout when the handle is closed in Glacier bay ARAGON HD833X-0101 Bathroom Fixtures?
If there is leaking or dripping from the spout when the handle is closed, it may be that the grommets are not sealing properly. Replace the cartridge.
What to do if there is no flow or a low water flow in my Glacier bay ARAGON HD833X-0101 Bathroom Fixtures?
If you experience no flow or low water flow, it might be that one or both water supplies are not turned on. Turn both water supply valves counterclockwise to the on position.
General| Brand | Glacier bay |
|---|---|
| Model | ARAGON HD833X-0101 |
| Category | Bathroom Fixtures |
| Language | English |
Key details and precautions before installing the product, including water supply and PEX system notes.
Details of the limited lifetime warranty, exclusions, and contact information for claims.
Guidance on planning the installation, ensuring all parts are present, and checking compatibility.
List of necessary tools and hardware for installing the faucet, including different plumbing methods.
Specific tools and diagrams for installing with IPS plumbing connections.
Specific tools and diagrams for installing with PEX and COPPER plumbing connections.
Specific tools and diagrams for installing with CPVC and COPPER plumbing connections.
Detailed list and visual representation of all parts included in the faucet package.
Essential preparation steps, including shutting off water and verifying hole dimensions.
Instructions for correctly connecting the hot and cold water supply lines to the valve body.
Steps for connecting the tub spout and shower pipes to the valve body and elbows.
Procedure for flushing the system and verifying all connections for leaks.
Guidance on installing the shower arm, flange, and shower head assembly.
Instructions for connecting and mounting the tub spout to the spout outlet pipe.
Steps to attach the handles to the valve body and secure them with set screws.
