PLANNING INSTALLATION
TOOLS REQUIRED
HARDWARE INCLUDED
Pre-Installation
NOTE: Hardware not shown to actual size.
Before you begin to install this product:
Ensure that all parts are present. Compare parts with the package contents list. If any part is missing or
damaged, do not attempt to install the product. Contact customer service for replacement parts.
Turn off the cold and hot water lines and turn on the old faucet to release built-up pressure.
When installing your new faucet, rst hand-tighten the connector nuts. Then use one wrench to hold the
tting and a second wrench to tighten the nut an additional 1/4 trun. Connections that are too tight will
reduce the integrity of the system.
Adjustable
Wrench
Phillips
Screwdriver
Safety
Goggles
Silicone
Caulk
Part Description Quantity
AA Hex wrench (H2.5 * 45mm L * 70mmL) 1
BB Hex wrench (1*H2.5*53L) 1
CC Aerator wrench 1
AA
BB CC
3 HOMEDEPOT.com
Please contact 1-855-434-5224 for further assistance.
To Next Page
Loading...
Need help?
General
