Removing the Quick Connecting Hose
Push the quick connector (L) housing up.
Hold the clip and housing together and pull
down.
Operation
CAUTION: Use caution when removing the quick
connecting hose connections in order to prevent cutting
your hands.
Care and Cleaning
Troubleshooting
Clean periodically with a soft cloth.
This faucet is designed for years of trouble-free performance. Keep it looking new by doing the following:
Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the nish and void your warranty.
Problem Possible Cause Solution
There are leaks underneath the
handle.
The retainer nut has come loose
and the O-ring on the cartridge
is dirty or damaged.
Tighten the retainer nut.
Clear or replace the O-ring.
The aerator leaks or has an
inconsistent water ow pattern.
The aerator is dirty or mis-tted. Remove the aerator and check for
debris in the aerator screens.
Conrm that the rubber washer is
properly installed.
There are leaks from the hose
underneath the deck.
The hose and spray head
connection may be loose.
Tighten the connection between the
spray head and hose.
The hose does not retract. The weight is not installed in the
appropriate position.
Reinstall or readjust the weight.
L
9 HOMEDEPOT.com
Please contact 1-855-434-5224 for further assistance.
To Next Page
Loading...
Need help?
General
