To Next PageTo Next Page
Need help?Do you have a question about the Glacier bay HD58302-1701 and is the answer not in the manual?
General| Brand | Glacier Bay |
|---|---|
| Model | HD58302-1701 |
| Category | Plumbing Product |
| Flow Rate (gallons per minute) | 1.8 |
| Handle Type | Lever |
| Number of Handles | 2 |
| Mounting Location | Deck Mount |
| Color/Finish | Brushed Nickel |
Ensure all parts are present and undamaged before beginning installation.
Lists the necessary tools for installation, including a wrench.
Details the components included in the product package with descriptions and quantities.
Remove the existing showerhead and clean the shower arm thread.
Apply sealant tape and hand-tighten the diverter onto the shower arm.
Apply sealant tape to diverter threads and hand-tighten the showerhead.
Connect the hose to the diverter and attach the other end to the handshower.
Slide the cover up to remove it from the suction bracket.
Position and secure the suction bracket to the wall using its handle and suction cup.
Slide the cover down to secure it back onto the suction bracket.
Turn on water, check for leaks, tighten connections, and place the hand shower.
Maintain the showerhead's finish by applying non-abrasive wax.
Rinse the showerhead immediately after using non-abrasive cleaners.
Avoid using abrasive cleaners to prevent damage to the showerhead.
If backflow prevention is missing, a vacuum breaker may be needed for compliance.
