To Next PageTo Next PageWhat to do if my Glacier bay HDQE1210001SP Plumbing Product water will not shut off completely?
If the water will not shut off completely, the cartridge may be dirty or misfitted. You can try to adjust or replace the cartridge.
How to fix low water flow in my Glacier Bay Plumbing Product?
A low flow of water may occur if the screen filter in the spray head is dirty. To resolve this, turn off the water supply at the angle stop and unscrew the spray head from the spray hose. Clean the screen filter in the spray head under running water.
How to fix leaks underneath the handle of my Glacier bay HDQE1210001SP?
If there are leaks underneath the handle, the adjusting ring may have come loose, or the O-ring on the cartridge may be dirty or damaged. You should tighten the adjusting ring and clean or replace the O-ring.
What does it mean if the RED indicator light is flashing or constantly on my Glacier Bay Plumbing Product?
If the RED indicator light starts flashing or is constantly on, this usually indicates a low battery. To resolve this: 1. Turn off the faucet. 2. Unplug the battery box. 3. Ensure all the batteries are installed in the correct orientation or replace them. If new batteries are not available, the infrared sensor can be disabled by turning the switch on the control box. 4. Reconnect the battery box, ensuring it is pushed all the way into the control box. The RED indicator light should be on, indicating that the faucet is in start-up mode. 5. If the light doesn’t turn on, call customer service (1-855-HD-GLACIER). 6. Turn on the faucet and wave your hand in front of the sensor to test if it is working properly.
General| Finish | White |
|---|---|
| Number of Handles | 1 |
| Flow Rate | 1.28 GPF |
| Handle Type | Lever |
| Mounting Type | Floor Mount |
| Color/Finish | White |
| Material | Vitreous China |
| Color | White |
| Installation Type | Floor mount |
| Rough-In Size | 12 in. |
| Water Consumption | 1.28 |
| Included Components | Wax Ring |
Ensure all parts are present and compare with the package contents list before beginning installation.
List of essential tools and hardware, including wrenches, safety goggles, and sealant, needed for installation.
Detailed list and diagrams of all components included in the faucet package for verification.
Step-by-step guide to mounting the faucet body to the sink, with or without a deck plate.
Instructions on securing the faucet to the sink using the provided FastMount™ system.
Steps for connecting the hot and cold water supply lines to the appropriate water valves.
Guidance on selecting a suitable location and securing the control box within the cabinet.
Instructions for securely attaching the quick connector to the top of the control box.
Procedure for securing the power cable to the control box or related component.
How to attach the weight to the spray hose for proper retraction and function.
Steps for attaching the quick connector to the bottom of the control box for a secure connection.
Instructions on installing AAA batteries into the battery box for faucet operation.
How to activate and use the faucet's touchless sensor for water flow.
Procedure for turning on the main water supply after installation is complete.
Steps to flush the faucet system and check for any leaks after installation.
Instructions on disabling the automatic sensor function for manual faucet use.
How the faucet operates with continuous use and automatically shuts off after 3 minutes.
Guidance on rotating the sensor left or right to avoid obstructions, up to 120 degrees.
Information on rotating the faucet spout left or right up to 180 degrees to avoid obstructions.
Procedure for safely disconnecting the quick connector from the control box hose.
Troubleshooting steps for leaks originating from underneath the faucet handle.
Solutions for addressing problems of low water flow from the faucet.
Steps to resolve issues where the faucet does not shut off completely.
Troubleshooting steps for inconsistent or low water pressure.
Solutions for when the faucet's sensor fails to detect or respond to motion.
Troubleshooting steps for issues related to the red indicator light on the control box.
