EasyManua.ls Logo

Glacier bay HD67780-1001 - User Manual

Glacier bay HD67780-1001
22 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THANK YOU
INSTALLATION AND CARE GUIDE
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Model#
HD67780-1001
HD67780-104405
HD67780-1008D2
HD67780-1010H
HD67780-104707F
HD67780-100602
PAULINA SINGLE-HANDLE PULL-DOWN SPRAYER
KITCHEN FAUCET WITH SOAP DISPENSER
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this kitchen
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
7/2021 REV.01THD
SKU#
1004553869
1005961179
1004558650
314089994
317421127
317421134
With Deck Plate Without Deck Plate

Table of Contents

Questions and Answers

  • S
    Stacey ClaytonAug 7, 2025
    Why is the water pressure low in my Glacier Bay Plumbing Product?
    • L
      leblancchristopherAug 7, 2025
      If the water pressure from your Glacier Bay Plumbing Product is low, it could be due to a clogged connector or aerator. To resolve this, turn off the water supply and disconnect the connector or aerator. Unscrew the connector or aerator and clean it under running water. Screw everything back together and test the water flow. If the pressure remains low, consider replacing the connector or aerator.
  • P
    pwheelerAug 12, 2025
    How to fix leaks under the handle of a Glacier bay HD67780-1001 Plumbing Product?
    • J
      Jessica ThomasAug 12, 2025
      If you notice leaks underneath the handle of your Glacier Bay Plumbing Product, it's likely that the bonnet nut has come loose or the o-ring on the cartridge is dirty or damaged. Use a wrench to retighten the bonnet nut. Also, clean or replace the o-ring to stop the leaks.
  • J
    Jack JonesAug 18, 2025
    What to do if the aerator leaks in Glacier bay HD67780-1001 Plumbing Product?
    • S
      sara68Aug 19, 2025
      If the aerator of your Glacier Bay Plumbing Product is leaking or has an inconsistent water flow, it might be dirty or misfitted, or the cartridge may be clogged. Try removing the aerator and checking for debris in the screens. Also, remove the cartridge to inspect for any blockages. Make sure the aerator is properly installed after cleaning.
  • M
    Michael JenkinsAug 25, 2025
    How to stop leaks from the hose under the deck of a Glacier bay HD67780-1001?
    • D
      Diana HudsonAug 25, 2025
      If you notice leaks from the hose underneath the deck of your Glacier Bay Plumbing Product, the connection between the hose and discharge tube may be loose. Tighten this connection to stop the leaks.
  • J
    Joseph GomezAug 31, 2025
    What to do if the hose doesn't retract on a Glacier Bay Plumbing Product?
    • J
      Jennifer ArnoldAug 31, 2025
      If the hose on your Glacier Bay Plumbing Product does not retract, the weight is likely not installed in the correct position. Reinstall or readjust the weight to fix this.

Summary

Important Information

Warranty Information

Pre-Installation Guide

Planning Installation Steps

Ensure all parts are present and compare with the list before installation.

Required Tools and Hardware

Lists necessary tools like adjustable wrench, safety goggles, and silicone sealant for installation.

Package Contents Breakdown

Lists all parts included in the faucet assembly and soap pump assembly with quantities.

Installation Process

Install Faucet Assembly (No Escutcheon)

CAUTION about shutting off water. Steps for installing faucet body into sink without escutcheon.

Install Faucet Assembly (With Escutcheon)

Steps for installing faucet assembly with escutcheon and gasket, securing with silicone sealant.

Secure Faucet Assembly to Sink

How to secure the faucet assembly to the sink using the FastMount™ system.

Attach Quick Connector to Receiving Block

Instructions to push and attach the quick connector to the receiving block and check connection.

Install Hose Weight

Instructions for installing the weight clip and weight onto the hose for proper retraction.

Install Soap Dispenser Unit

Steps to insert and secure the soap assembly, bottle, and pump into the sink.

Connect Water Supply Lines

How to thread the supply line nut onto the water supply valve and tighten with a wrench.

Operation and Maintenance

Flush Lines and Check for Leaks

Instructions to flush water lines, check for leaks after installation, and re-tighten connections.

Disconnect Quick Connector

How to disconnect the quick connector by squeezing the tabs and pulling down.

Care and Cleaning Guide

Standard Cleaning Method

Wipe down with a damp cloth and dry with a towel for cleaning.

Cleaning Product Restrictions

Avoid abrasive cleaners, steel wool, or harsh chemicals to prevent voiding the warranty.

Troubleshooting Common Issues

Handle Leaks Troubleshooting

Addresses leaks from the handle, suggesting retightening the bonnet nut or checking the o-ring.

Aerator Flow Issues

Solutions for aerator issues, including cleaning, refitting, or checking the cartridge.

Hose Leaks Under Sink

Fixes for leaks at the hose connection, recommending tightening.

Hose Retraction Problems

Addresses the hose not retracting, suggesting weight adjustment.

Low Water Pressure Solutions

Solutions for low water pressure, involving checking connectors and aerator cleanliness.

No Hot or Cold Water Diagnosis

Troubleshooting for no hot/cold water, checking for kinks in the water inlet hose.

Low Water Flow Fixes

Addresses low flow by cleaning the spray head screen filter.

Service Parts List

Glacier bay HD67780-1001 Specifications

General IconGeneral
BrandGlacier bay
ModelHD67780-1001
CategoryPlumbing Product
LanguageEnglish

Related product manuals