EasyManua.ls Logo

Glacier bay HD67780-1010H - User Manual

Glacier bay HD67780-1010H
22 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THANK YOU
INSTALLATION AND CARE GUIDE
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Model#
HD67780-1001
HD67780-1008D2
HD67780-1010H
PAULINA SINGLE-HANDLE PULL-DOWN SPRAYER
KITCHEN FAUCET WITH SOAP DISPENSER
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this kitchen
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
7/2020 REV.01THD
SKU#
1004553869
310471038
314089994
With Deck Plate Without Deck Plate

Table of Contents

Questions and Answers

  • B
    bacostaAug 5, 2025
    Why is the water pressure low in my Glacier Bay Plumbing Product?
    • D
      Douglas GrahamAug 5, 2025
      If the water pressure from your Glacier Bay Plumbing Product is low, it could be due to a clogged connector or aerator. To resolve this, turn off the water supply and disconnect the connector or aerator. Unscrew the connector or aerator and clean it under running water. Screw everything back together and test the water flow. If the pressure remains low, consider replacing the connector or aerator.
  • O
    Olivia ClarkAug 9, 2025
    How to fix leaks under the handle of a Glacier Bay Plumbing Product?
    • A
      ashley38Aug 9, 2025
      If you notice leaks underneath the handle of your Glacier Bay Plumbing Product, it's likely that the bonnet nut has come loose or the o-ring on the cartridge is dirty or damaged. Use a wrench to retighten the bonnet nut. Also, clean or replace the o-ring to stop the leaks.
  • D
    donna83Aug 13, 2025
    What to do if the aerator leaks in Glacier Bay Plumbing Product?
    • T
      Tina CabreraAug 14, 2025
      If the aerator of your Glacier Bay Plumbing Product is leaking or has an inconsistent water flow, it might be dirty or misfitted, or the cartridge may be clogged. Try removing the aerator and checking for debris in the screens. Also, remove the cartridge to inspect for any blockages. Make sure the aerator is properly installed after cleaning.
  • J
    Julie JamesAug 18, 2025
    Why is there a low flow of water from my Glacier bay HD67780-1010H Plumbing Product?
    • R
      Russell JohnsonAug 19, 2025
      If you experience a low flow of water in your Glacier Bay Plumbing Product, the screen filter in the spray head might be dirty. To fix this, turn off the water supply at the angle stop and unscrew the spray head from the spray hose. Clean the screen filter under running water.
  • J
    Jessica KingAug 22, 2025
    Why is there no hot or cold water in my Glacier Bay Plumbing Product?
    • J
      Julie HouseAug 23, 2025
      If there is no hot or cold water coming from your Glacier Bay Plumbing Product, it's possible the water inlet hose was accidentally kinked during installation, restricting water flow. Reinstall the water inlet hose to resolve this issue.
  • K
    kellyrobertsAug 27, 2025
    How to stop leaks from the hose under the deck of a Glacier bay HD67780-1010H Plumbing Product?
    • M
      Melissa TaylorAug 27, 2025
      If you notice leaks from the hose underneath the deck of your Glacier Bay Plumbing Product, the connection between the hose and discharge tube may be loose. Tighten this connection to stop the leaks.
  • T
    tammy02Aug 31, 2025
    What to do if the hose doesn't retract on a Glacier Bay Plumbing Product?
    • S
      shawnellisAug 31, 2025
      If the hose on your Glacier Bay Plumbing Product does not retract, the weight is likely not installed in the correct position. Reinstall or readjust the weight to fix this.

Summary

Important Information

Warranty

Pre-Installation

Planning Installation

Details on preparing for the faucet installation and checking parts.

Tools and Hardware Required

Lists the necessary tools and hardware for the installation process.

Package Contents

Lists all included parts for the faucet and soap dispenser assembly.

Installation

Installing the Faucet Assembly

Steps for installing the main faucet body onto the sink or deck.

Securing the Faucet Assembly

Procedure for fastening the faucet assembly securely underneath the sink.

Attaching the Quick Connector

Instructions for connecting the pull-down hose to the faucet body.

Installing the Weight

Guidance on attaching the weight to the pull-down hose.

Installing the Soap Dispenser

Steps for mounting and connecting the soap dispenser assembly.

Making Water Supply Connections

Details on connecting the faucet to the hot and cold water supply lines.

Operation

Flushing and Checking for Leaks

Procedure to flush the faucet lines and check for any water leaks after installation.

Removing the Quick Connector

Instructions on how to disconnect the quick connector from the faucet hose.

Care and Cleaning

Troubleshooting

Service Parts

Glacier bay HD67780-1010H Specifications

General IconGeneral
BrandGlacier Bay
ModelHD67780-1010H
CategoryPlumbing Product
TypeKitchen Faucet
Faucet TypePull-Down
FinishStainless Steel
Sprayer TypePull-Down
Number of Handles1
Mounting TypeSingle Hole
Flow Rate1.8 GPM
Maximum Pressure80 PSI
Minimum Pressure20 PSI
MaterialMetal
Handle StyleLever
Product TypeFaucet
Installation TypeDeck Mount
Weight5.5 lb

Related product manuals