Glacier bay MARKET HD67551-1201 User Manual (English)

Questions and Answers:

T
Troy ChaneyAug 8, 2025
What to do if the water pressure is low in my Glacier bay MARKET HD67551-1201?
- D
  Danielle OrrAug 8, 2025
  If the water pressure of your Glacier Bay Plumbing Product is low, it might be due to a clogged connector underneath the deck or a clogged aerator. To resolve this, turn off the water supply and disconnect the connector/aerator. Unscrew the connector/aerator and clean it under running water. Then, screw the connector/aerator back on and test the water flow. If the water pressure remains low, consider replacing the connector/aerator.
B
Benjamin LozanoAug 12, 2025
Why does the aerator on my Glacier bay MARKET HD67551-1201 Plumbing Product leak or have inconsistent water flow?
- E
  ellen77Aug 12, 2025
  If your Glacier Bay Plumbing Product aerator leaks or has an inconsistent water flow, the aerator might be dirty or misfitted, or the cartridge may be clogged. Remove the aerator and check for debris in the aerator screens. Also, remove the cartridge to check for any debris. Ensure that the aerator is properly installed after cleaning.
R
Robin PadillaAug 16, 2025
How to fix leaks underneath the handle of a Glacier bay MARKET HD67551-1201?
- A
  Andrea CastilloAug 16, 2025
  If you notice leaks underneath the handle of your Glacier Bay Plumbing Product, it could be because the bonnet nut has come loose or the o-ring on the cartridge is dirty or damaged. Use a wrench to retighten the bonnet nut sufficiently. Also, clean or replace the o-ring.
G
gjamesAug 21, 2025
What to do if my Glacier bay MARKET HD67551-1201 has a low flow of water?
- J
  James LeonardAug 21, 2025
  If your Glacier Bay Plumbing Product has a low flow of water, the screen filter in the spray head might be dirty. To resolve this, turn off the water supply at the angle stop and unscrew the spray head from the spray hose. Clean the screen filter in the spray head under running water.
L
lucasbruceAug 25, 2025
How to stop leaks from the hose under the deck of my Glacier bay MARKET HD67551-1201?
- T
  Tasha LeonAug 26, 2025
  If you find leaks from the hose underneath the deck of your Glacier Bay Plumbing Product, the connection between the hose and discharge tube may be loose. Tighten the connection between the discharge tube and the hose to stop the leaks.
S
Sharon SmithAug 29, 2025
Why doesn't the hose retract on my Glacier bay MARKET HD67551-1201?
- J
  Jeffrey CordovaAug 29, 2025
  If the hose on your Glacier Bay Plumbing Product does not retract, the weight may not be installed in the correct position. Try reinstalling or readjusting the weight to ensure proper retraction.
J
Juan PeckSep 2, 2025
Why is there no hot or cold water from my Glacier bay MARKET HD67551-1201 Plumbing Product?
- D
  dawncaldwellSep 2, 2025
  If there is no hot or cold water coming from your Glacier Bay Plumbing Product, the water inlet hose may have been accidentally kinked during installation, limiting the water flow. Reinstall the water inlet hose to correct this issue.

Glacier bay MARKET HD67551-1201 Specifications

General

ADA Compliant	Yes
Flow Rate (gallons per minute)	1.2
Handle Type	Lever
Spout Reach (in.)	4.5
Valve Material	Ceramic
Brand	Glacier Bay
Model	HD67551-1201
Category	Plumbing Product
Color	Chrome
Material	Metal
Warranty	Lifetime