To Next PageTo Next PageWhat to do if the Glacier bay FARRINGTON HD67750W-6101 water will not shut off completely?
If the water won't shut off completely, the cartridge may be dirty or broken. Remove the handle to check the cartridge, and then clean or replace it as needed.
How to fix leaks from the handle of a Glacier Bay Plumbing Product?
Leaks from the handle may occur because the bonnet nut has come loose, or the washer is dirty or damaged. Try tightening the bonnet nut. If that doesn't work, clean or replace the washer.
General| ADA Compliant | Yes |
|---|---|
| Flow Rate (gallons per minute) | 1.2 |
| Handle Type | Lever |
| Mounting Location | Deck Mount |
| Number of Faucet Handles | 2 |
| Valve Material | Ceramic |
Details the limited lifetime warranty for Glacier Bay products.
Guides on checking parts and preparing for the installation process.
Lists necessary tools and hardware for the faucet installation.
Lists all included parts for the faucet assembly and drain.
Step-by-step instructions for mounting the faucet to the sink.
Instructions for disassembling the pop-up stopper and drain flange.
Steps for attaching the drain body and securing it under the sink.
Guides on inserting the stopper and connecting the horizontal rod.
Instructions for connecting the lift rod to the faucet mechanism.
How to connect the lift rod strap to the horizontal rod.
Optional step for shortening the lift rod strap if needed.
Verifies the correct function of the stopper and lift rod.
Instructions for connecting the hot and cold water supply lines.
Procedures for flushing the system and checking for leaks after installation.
Guidelines on how to clean the faucet and what to avoid.
Addresses common problems like leaks and water shut-off issues.
Identifies all parts with their corresponding numbers for replacement.
