To Next PageTo Next PageWhy are there leaks from the handle of my Glacier Bay Bathroom Fixtures?
Leaks from the handle of your Glacier Bay Bathroom Fixtures can occur if the bonnet nut is loose or the washer is dirty or damaged. Try tightening the bonnet nut. Alternatively, clean or replace the washer.
How to fix irregular water flow from the aerator in Glacier bay HD67084W-6010H Bathroom Fixtures?
If the aerator of your Glacier Bay Bathroom Fixtures has an irregular or reduced water flow, it might be dirty or mis-fitted. Remove the aerator and check for debris. Also, ensure that the rubber washer is properly installed.
What to do if the water will not shut off completely in Glacier Bay Bathroom Fixtures?
If water won't shut off completely in your Glacier Bay Bathroom Fixtures, the cartridge might be dirty or broken. Remove the handle to inspect the cartridge, and then clean or replace it as needed.
What to do if there is leaking from the sink drain at the base of the sink of Glacier Bay Bathroom Fixtures?
If there's leaking from the sink drain at the base of the sink in your Glacier Bay Bathroom Fixtures, it could be due to a rough or irregular sink surface. Apply additional silicone sealant to the beveled side of the drain flange. Then, retighten and test for leaks.
General| Brand | Glacier Bay |
|---|---|
| Model | HD67084W-6010H |
| Category | Bathroom Fixtures |
| Material | Metal |
| Mounting Location | Deck Mount |
| Flow Rate | 1.2 GPM |
| Aerated Flow Rate | 1.2 GPM |
| WaterSense Certified | Yes |
| Lifetime Limited Warranty | Yes |
| Product Type | Faucet |
| Installation Type | Deck Mount |
