Gladiator GEARTRACK CHANNEL - GEARTRACK Channels and GEARWALL Panels Installation Safety; GEARTRACK Channels and GEARWALL Panels Installation Instructions; Parts and Tools

2
GEARTRACK
®
CHANNELS AND GEARWALL
®
PANELS
INSTALLATION SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
PARTS
Parts
GearTrack
®
Channels GearWall
®
Panels
Masonry
/ Poured
Concrete
Bare Wood
Studs
Drywall Over
Wood Studs
½”(1.3 cm),
5
/
8
” (1.6 cm),
¾” (1.9 cm)
Masonry
/ Poured
Concrete
Bare Wood
Studs
Drywall Over
Wood Studs
½”(1.3 cm),
5
/
8
” (1.6 cm),
¾” (1.9 cm)
#8 x 1¹⁄
4
”(3.08 cm)*
#8 x 2” (5.08 cm)
(included)*
3
/
16
” (4.76 mm) x 1¾”
(4.45 cm)**
Construction adhesive
2” (5.08 cm) x 4” (10.16
cm) Wooden studs
¹⁄
4
” (6.3 mm) x 2³⁄
4
”
(6.99 cm)**
GEARTRACK
®
CHANNELS/GEARWALL
®
PANELS
INSTALLATION INSTRUCTIONS
Parts and Tools
■ Remove all parts and fasteners from their packaging, and dispose of/recycle all packaging materials.
■ Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
* Use an all-weather at-head type deck screw.
** Use a at-head type masonry screw.