What to do for DCASE communication error alert in Glamox application?
If you receive an alert in the application indicating a DCASE communication error, it suggests an internal VERTEX error. Restart the Glamox device. If the problem persists, contact the manufacturer.
General| Brand | Glamox |
|---|---|
| Model | Vertex PN8100102 |
| Category | Controller |
| Language | English |
Covers essential safety information, symbols, and precautions for system installation and operation.
Instructions for installing the DALI bus cabling according to good electrical practice.
Step-by-step guide for connecting the VERTEX control unit to DALI bus, LAN, and power.
Diagrams for connecting emergency luminaires in TA and TC modes.
Verification steps for power wiring and device status indicators.
Verifying LAN cabling conformity and DALI bus continuity, voltage, and current.
Instructions for configuring network parameters on VERTEX controllers using the Vertex Firestarter application.
Methods for searching, addressing, and assigning user-defined names to system devices.
Using Node-RED for programming system logic, managing flows, and program blocks.
Mechanism for prioritizing actions based on control groups and priority values.
How to manually trigger functional and autonomy tests for luminaires or groups.
Dividing emergency luminaires into up to 8 test groups for safer testing.
Programming automatic schedules for functional, autonomy tests, and battery formatting via the Calendar screen.
Overview of common problems and actions to take for resolving them.
Troubleshooting steps for POWER LED off, ON, or flashing red/green status lights.
Resolving issues with port status LEDs and the Firestarter application not detecting control units.
Troubleshooting why the VERTEX control application might not show all connected devices.
Resolving application alerts related to connection errors, 230V on port, and too many devices.
Resolving application alerts for short-circuits, DCASE communication errors, and EEPROM/FLASH memory errors.
Resolving issues with error UIDs in grouping, unsynchronized time, and unconfigured networks.
Addressing problems with devices not responding, losing parameters, duplicate serial numbers, or communication errors.
To Next Page
