• Before each ride, please make sure that all screws or self-lo-
cking fasteners and quick release clamps are tightened and
that the the handlebar's locking lever is well engaged.
• Make sure the tyre pressure is correct (see page 9)!
• Only use a soft, damp cloth for cleaning the Folding E-Scoo-
ter. Dirt that cannot be removed this way can be removed
with plastic polish. Follow the manufacturer's instructions in
this respect.
• Never use alcohol, cleaner's naphtha, acetone or other
corrosive and volatile chemical solvents that are corrosive
to surfaces. These substances can damage the bike's ap-
pearance and its exterior or interior structure.
• Never clean the Folding E-Scooter with a strong jet of water
or high-pressure cleaner.
• Make sure the Folding E-Scooter is switched off and the
charging socket cover is closed before cleaning, otherwise
you may be exposed to the risk of electric shock or damage
the Folding E-Scooter.
To Next Page
Loading...
