Adjusting the brake callipers:
• Check regularly to see whether the brake callipers of the two
disc brakes are properly adjusted.
• You will need theAllen key and a rubber band to adjust the
brake callipers:
1. Slightly loosen the two brake calliper mounting bolts until
you can move the brake calliper.
2. Then fix the brake lever with the rubber band to centre
the brake calliper.
3. Tighten both brake calliper mounting bolts again. After
removing the rubber band, check whether the wheel can
be moved easily.
Brake calliper mounting bolts
• The adjustment procedure is the same for both the front and
rear brakes.
To Next Page
Loading...
