Glasco UV GUV C Classic series User Manual

ULTRAVIOLET WATER DISINFECTION SYSTEM
OPERATION & MAINTENANCE MANUAL
RESIDENTIAL AND COMMERCIAL
GUV C “The Classic” and GUV C “PLUS”
GUV-C7 (7 GPM), GUV-C10 (10 GPM), GUV-15C (15 GPM), GUV-C20 (20 GPM)
GUV-C7-PLUS, GUV-C10-PLUS, GUV-15C-PLUS, GUV-C20-PLUS
GUV C “CLASSIC” (audible lamp out) GUV-C PLUS (alarms + countdown timer)
Use the chart to record lamp changes to the system:
SYSTEM INSTALLATION DATE:
Lamp should be changed 1 x year (8,760 hours)
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Lamp Change Date:
Manufactured in the United States by Glasco UV, LLC.

Glasco UV GUV C Classic series Specifications

General

Brand	Glasco UV
Model	GUV C Classic series
Category	Water Filtration Systems
Language	English

Summary

Your Disinfection Unit - Pre-Installation

Warnings

UV light is harmful; unplug unit before servicing. Adhere to safety precautions to avoid injury or death.

UV Lamp and Effectiveness

Unit requires yearly lamp changes and quartz sleeve cleaning for optimal disinfection.

Electrical Requirements

Your Disinfection Unit - Installation

Quartz for Open-ended Units

Installing the Lamp

Instructions for carefully sliding the lamp into the quartz sleeve and connecting it.

Maintenance

Operation Status, Alarms & Instructions on how to Reset alarms

CLASSIC

CLASSIC PLUS

CLASSIC PLUS RESET

Procedure to reset the lamp life countdown timer on the Classic Plus system.

Recommendations, General Information and Reminders

Plumbing and Sanitization

Safety Precautions

Always disconnect power and depressurize system before performing maintenance.