Glasco UV GUV-C7-SC-+

To Next Page

ULTRAVIOLET WATER DISINFECTION SYSTEM

OPERATION & MAINTENANCE MANUAL

RESIDENTIAL AND COMMERCIAL

GUV C “The Classic” and GUV C “PLUS”

GUV-C7 (7 GPM), GUV-C10 (10 GPM), GUV-15C (15 GPM), GUV-C20 (20 GPM)

GUV-C7-PLUS, GUV-C10-PLUS, GUV-15C-PLUS, GUV-C20-PLUS

GUV C “CLASSIC” (audible lamp out) GUV-C PLUS (alarms + countdown timer)

Use the chart to record lamp changes to the system:

SYSTEM INSTALLATION DATE:

Lamp should be changed 1 x year (8,760 hours)

Lamp Change Date:

Manufactured in the United States by Glasco UV, LLC.

Main Page

Need help?

Do you have a question about the Glasco UV GUV-C7-SC-+ and is the answer not in the manual?

Summary

Disinfection Unit - Pre-Installation

Information Signs and Warnings

Explains important signs for information, eye protection, caution, electric shock, and hand protection.

Disinfection Unit - Operational Guidelines

Lamp Effectiveness and Maintenance

Maintenance, effectiveness, and proper disposal of UV lamps.

Disinfection Unit - Electrical and Location

Electrical Requirements

Power supply, connections, grounding, and ballast systems.

Disinfection Unit - Installation Procedures

Quartz Sleeve Installation

System Maintenance

Lamp Replacement and Quartz Cleaning

Annual lamp replacement and periodic quartz sleeve cleaning.

Operation Status and Alarms

CLASSIC Model Indicators

CLASSIC PLUS Model Indicators

Ballast Control Center (BCC) Function