GLEANER S67 - Combine Setup; Cereal Grain - Wheat, Oats, Barley

Combine Setup
Cereal Grain - Wheat, Oats, Barley
Initial Combine Setup
Crop Rotor RPM
Concave Setting *
Fan Opening Chaffer Opening Sieve Opening Chopper Speed Elevator Boots
Wheat 750
0.1” -
0.2”
3 - 6
0.75”
(19 mm)
0.375”
(10 mm)
Fast Solid
Oats 600
0.1” -
0.2”
3 - 6
0.75”
(19 mm)
0.375”
(10 mm)
Fast Solid
Barley
400 -
600
0.1” -
0.2”
3 - 6
0.75”
(19 mm)
0.375”
(10 mm)
Fast Solid
* - As read on the Tyton
™
terminal on the S9 Series or EIP on S8 and S7 Series.
Initial Header & Header Drive Setup
• Cutterbar locked up on ex headers.
• Variable speed header drive in slowest position.
• Right-hand pivot drive belt positioned on large countershaft drive
sheave.
• Left separator cage cover should be required for all cereal crops.
Straw Chopper
• Position chopper drive belt so chopper is operating at fast speed.
Tips
• Filler bars may be required for hard threshing cereals to eliminate
white caps. Order Concave Filler Kit #700958588 from your
dealer.
• If white caps persist, dealer should contact Technical Service Support
for additional kits required.
• A narrow wire-4 section concave option may be ordered from the
factory in lieu of the All Crop concave or from AGCO Parts for areas
predominately harvesting harder threshing cereals such as spring
wheat and canola. Order Narrow Wire Concave #71469348 from
your dealer.
1