Glendale GL1802 - Step-by-Step Assembly Guide; Step 1 & 2: Connecting Upright Legs and Foot Plates; Step 3 & 4: Adding Frame Supports and Curtain Track

Page | 3
Assembly Instructions
Step 1 & 2
Connect the upright leg (1)
With the foot plate part (10)
Add clip (14) to the top of the
leg and to all the pre-drilled
legs as shown
Do not over tighten the
screws at this stage
Step 3 & 4
Add the cross supporting
members by connecting
using inserts G & F
Add the supporting side parts
(5)
And add the curtain tracking
bar to the inside of the frame
If you need help with assembly or missing parts please contact our customer care team on:
support@glendale-leisure.co.uk