EasyManua.ls Logo

Glide G2 - Throttle Control

Glide G2
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Turn the key to the 'ON' position, then turn the Throttle Gradually to accelerate.
To prevent losing control of the vehicle, please turn the Throttle slowly until the
speed increases.
Do not turn the Throttle until you are in the position to drive.
To stop, release the throttle and apply the front and rear brake simultaneously.
You can decelerate by slightly pressing the brakes to start regeneration mode.
To move, release the brakes and turn the Throttle gradually.
When you turn move the turn signal switch left or right and don't forget to press
it to turn it off.
The Brushless motor makes a small electromagnetic noise when turning the Throt
tle to start. This is normal. 8. Please, for your safety and security, take the key out
when you are not riding.
1.
2.
3.
4.
5.
6.
7.
THROTTLE CONTROL
The ESCOOTER uses a speed changing throttle grip. It is on the right side of
the handlebar. Rotate the throttle grip toward the seat to accelerate and
rotate forward away from the seat to slow down.
It is suggested after acceleration to turn back 1/4 turn the throttle. This
will increase your range and increase your battery life.
12
SIDECAR

Related product manuals