Glide G2 - Before each Ride

SIDECAR WARNINGs!
IN ADDITION TO THE REQUIREMENTS ABOVE:
1.
2.
3.
4.
5.
BEFORE EACH RIDE:
WARNING ! CAUTION !
Make sure you properly wear a helmet.
Wear protective clothing and gloves.
Wear eye protection that does not interfere with your peripheral vision.
Check local and state laws before operating the ESCOOTER in any area.
Make sure all tail/brake lights, turn signals and headlight are operational.
Make sure the horn is operational.
Make sure the brakes are properly adjusted and working correctly (see further
detailed instructions).
Make sure you understand how the brakes work and that your hands can reach
and squeeze the levers comfortably and hard enough to stop the ESCOOTER
safely.
Make sure the chain is properly adjusted (see further detailed instructions).
Make sure all parts of the ESCOOTER are properly and securely fastened and
adjusted, including but not limited to crank arms, wheels, all controls and cargo
(Please refer to Assembly Instructions).
Make sure the tires are not excessively worn, do not have tears or cuts, and are
properly seated on the rim and inflated to the proper pressure on the sidewall
(DO NOT USE GAS STATION PUMPS FOR INFLATION).
Make sure the wheels spin straight and that the rims are not bent or damaged
(front wheel must be undamaged for front brake to work properly).
Make sure the throttle is in the "OFF" position before turning ESCOOTER key on.
This will prevent the ESCOOTER from moving forward without notice once the
ignition key is turned.
Make sure the "Air Switch" under the seat is in the "On" position before turning key
on.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
4
SIDECAR