What to do if GLIDEAWAY Indoor Furnishing remote illuminates but base won't activate?
- JJordan EllisAug 1, 2025
If the GLIDEAWAY Indoor Furnishing remote control illuminates but the base doesn't activate, try these steps: 1. Test the outlet by plugging in another working appliance to rule out a defective surge protector or outlet. 2. Check the electrical service breaker box to ensure an electrical circuit breaker hasn't tripped. 3. Unplug the power cord, wait 30 seconds, and then plug it back in to reset the electronic components. 4. Re-link the remote control by following the programming procedures in the Remote Control Re-Linking section.