English
INSTALLATION MANUAL
1. Introduction
2. CE declaration
3. SAFETY
3.1 General
3.2 Regulations
3.3 Precautions/safety instructions during installation
3.4 Second thermocouple safety
3.5 Oxypilot safety
4. Removing the packaging
5. Installation
5.1 Type of gas
5.2 Gas connection
5.3 Placing the appliance
5.4 Placing a built-in appliance
5.5 Placing the chimney breast
5.6 Placing the control hatch
5.7 Flue gas discharge system in appliances with open combustion
5.7.1 General
5.7.2 Connection flue gas discharge system
5.8 Flue gas discharge / combustion air supply system in appliances with closed combustion
5.8.1 General
5.8.2 Construction of the concentric system
5.8.3 Placing the concentric system
5.8.4 Connection existing chimney
5.9 Additional instructions
5.9.1 Placing a suspended appliance
5.10 Glass panes
5.10.1 Removing the front glass pane
5.10.2 Removing the side glass pane
5.10.3 Placing the glass pane
5.11 Adjustment of the appliance
5.11.1 Restrictor slide
5.11.2 Air inlet guide
5.12 Placing the wood/pebble set
5.12.1 Wood set
5.12.2 Pebble set
6. Wireless remote control
6.1 Connecting the receiver
6.1.1 Connecting the receiver
6.1.2 Placing / replacing the receiver's batteries
6.2 Setting the communication code
7. Final inspection
7.1 Gastightness
7.2 Gas pressure/line-pressure
7.3 Ignition pilot and main burner
7.3.1 First ignition of the appliance after installation or adjustments
7.3.2 Main burner
7.4 Flame picture
8. Maintenance
8.1 Parts
9. Delivery
10. Malfunctions
Appendix 1 Diagnosis of malfunctions
Appendix 2 Various tables
Appendix 3 Figures
Contents
UK