Section 4 Accessories
4-3
M A1061-SVA & M A1061-S50 Single Port Beamsplitter
The single port beamsplitter models have one (1) mounting port for a camera adapter. The beamsplitter can
be congured with a 50/50 prism M A1061-S50 or 95/5 prism M A1061-SVA. The M A1061-S50 model directs
50% of the light through the microscope toward a camera mounted on the side of the beamsplitter, while
the other 50% of light passes through to the user’s eye. The M A1061-SVA prism directs only 5% of the light
toward the camera while the other 95% of the light passes through to the user’s eye. The beamsplitter can
mount to the microscope with the port oriented toward the user’s right or left, depending on personal
preference. The choice of which prism to use should be based on the type of camera intended to be mounted
to the microscope.
M A1017 Carr Adapter, 45° Binocular Extender
Provides ergonomic benets by positioning the binocular higher and further from the microscope body.
M A1022 Series Binoculars
The inclinable binoculars allow for 0-220 degrees of tilt articulation. This feature accommodates multiple user
heights while maintaining optimal ergonomic posture. It also allows the user to maintain this posture while
moving the microscope head.
To Next Page
Loading...
Need help?
General
