9
ENGLISH
7 - MAINTENANCE
• Warning! As with any mechanical component, your product is subject to high stresses and wear. The various materials and
suddenly, thereby risking injuries to the user. Cracks, scratches, and discoloration in the areas subject to high stresses indicate
•
Globber representative at contact@globber.com.
•
contact@globber.com.
• The lithium battery: To guarantee the battery lifetime, charge it when its level is low. If it is not used for a long period of time, you
representative.
The recommended storage temperature for the battery is between 5°C and 30°C.
•
• Never store the electric scooter in a car during hot weather to avoid any danger of this.
• Bearings: Avoid riding through water, oil, or sand, which would damage your bearings. To maintain your bearings, check regularly
remove the wheel. Carefully push the two bearings out of their seating. If they are chipped or crushed, buy new ones. If there is
no visible damage, oil them. To do so, remove any traces of grease, mud, or dust from the bearing using a paper towel or a cloth;
• The wheels: The wheels wear out over time or may even develop holes if the scooter is used on rough surfaces too often. This is
particularly true of the rear wheel on which the brake is applied. Check them regularly and have them changed for better safety.
•
mentioned in these instructions.
•
case they should be tightened. They can become worn and not tighten properly, in which case they should be replaced.
8 - DISPOSAL OF END-OF-LIFE APPLIANCE
• The appliance must be disconnected from the main power supply when removing the battery.
• The battery must be removed from the appliance before the appliance is discarded.
• The battery must be disposed of safely by taking it to a suitable collection point.
To Next Page
Loading...
