EasyManua.ls Logo

Glow-worm 30ci plus - Page 42

Glow-worm 30ci plus
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
4000123944-2
18 Fault Finding
FAULT: THE FAN DOES NOT START.
Check continuity of fan harness.
NO
YES
Is there 230V ac
at fan during demand?
Faulty fan, replace.
YES
Faulty C, replace.
FAULT: THE WATER AT THE TAPS IS LUKE-WARM.
NO
YES
Check that the flow restrictor on the cold
water inlet is fitted.
Check the rate of flow.
Check burner pressure is correct.
Check the 3-way valve is not passing
into the radiators. (The radiators should
stay cold in Summer setting)
Is the temperature higher if you reduce
the flow through the taps?
9966p9968p
• CHECK CONTINUITY OF IGNITION (ELECTRODES AND LEADS)
• CHECK POWER SUPPLY FROM PCB TO IGNITION UNIT
Air flow switch take-off.
CONNECTIONS TO THE AIR PRESSURE SWITCH
Pr
3
2 1
P2
P1
LH
Electrical contacts.
FAULT: THE FAN RUNS BUT THERE ARE NO SPARKS.
11877

Related product manuals