Supplied By www.heating spares.co Tel. 0161 620 6677
www.glow-worm.co.uk
11
Power indicator
OFF: no electrical power supply to the boiler.
Flashing: boiler electrically fed, but in stand-by ( ).
ON: boiler ready for operation upon demand.
Diagram 5
Toggles IN - Heating enabled
Toggles OUT - Heating disabled
Lever on “I” - Heating always on
regardless toggles setting
Lever on - Heating follows toggles setting
Lever on “0” - Heating always off
regardless toggles setting
Boiler Operation - User Controls
Timeclock
Turn the timeclock clockwise on the current time. Note: the timeclock
stops when power supply fails: if so, check the time again.
Set the heating time by pushing in the toggles corresponding to the
hours of the day that you want to heat. Note: heating will be managed
also by external controls (e.g. room thermostat) if any.
Set the timeclock’s lever on to enable timed heating.
See Diagram 5 for details.
To Next Page
Loading...
