Need help?Do you have a question about the Glow-worm Betacom 4 and is the answer not in the manual?
General| Brand | Glow-worm |
|---|---|
| Model | Betacom 4 |
| Category | Water Heater |
| Language | English |
Specifies the intended purpose and limitations of the heat generator for closed heating installations.
Details the required professional training and capabilities for performing work on the product.
Provides essential safety information to prevent risks of death, injury, or material damage.
Outlines the importance of observing national regulations, directives, laws, and standards.
Lists general technical parameters for the Betacom 4 boilers, including dimensions and weight.
Details performance data related to heating output, flow rates, and domestic hot water capabilities.
Provides technical data concerning the electrical connection, power consumption, and IP rating.
Information on CE marking, serial numbers, and data plate details for product identification.
Diagram and list of the main functional components of the Combi boiler.
Description of built-in safety features like electrical supply failure and overheating protection.
Covers checking delivery scope, dimensions, installation site, clearances, and ventilation.
Details regulations, positioning guidelines, and configuration descriptions for air/flue pipe systems.
Instructions for using mounting templates, wall-mounting, and removing/installing front and side casings.
Covers preparing for installation, gas/water connections, and condensate pipework.
Includes connecting drain cocks, flue installation, and detailed electrical wiring instructions.
Guides on using diagnostics, displaying status codes, and running check programmes.
Covers initial start-up, checking and treating heating water, and filling procedures.
Instructions for flushing, purging heating and DHW circuits, and checking gas settings.
Includes checks for leak-tightness and adapting the unit via diagnostic codes.
Details on handing over the product to the end user, including documentation and safety explanations.
Covers inspection intervals, checking CO2 content, cleaning various components like heat exchanger and siphon.
Procedures for replacing components and rectifying faults, including accessing fault memory.
Includes checking for leak-tightness, decommissioning, and disposal instructions.
Lists minimum inspection and maintenance work and their intervals.
Overview of available check programmes and a detailed list of diagnostic codes.
Provides overviews of status codes and fault codes with possible causes.
Includes wiring diagrams, commissioning checklists, and service records.
To Next Page
