Glow-worm Climapro2 RF - Access To The Installer Menu; Description Of The Installer Menu; Heating Function

0020094586_01-08/10-Glow-worm
- 11 -
INSTALLATION
 
• Pressbutton for7seconds.
• Entertheinstallercode96.
 
 
Usethebuttons:
Selectwiththebutton:
Selectwiththebutton:
- toreturntotheprofessionalmenu
screen,
- for3secondstoreturntotheuser's
mainscreen.
Showing, enabling and disabling of functions is
reected in the user menu.
 
 
Setthemaximumadjustableroom
temperature.
Correctthemeasurementoftheroom
temperature.
Activateordeactivatethemodulating
controlforthehotwatertemperature.
(*)automaticadjustmentoftheheatingwatertemperature
 
Thisfunctionletsyouadjustthemaximumroomtemperature
thatcanbesetbytheuser(valueadjustablebetween5and
30°C-factorysetting:30°C).
• Fromtheinstallermenu(seeaccesstotheinstallermenu)>
selectonthescreen>>


• Increaseordecreasewiththebuttons todisplaythe
initialcoolingtemperatureandpressthebutton
.
 
Thisfunctionletsyourectifythetemperaturemeasuredbythe
ambienttemperaturethermostat(by+/-5°Cwithastepof
0.5°C-(factorysetting:0).
• Fromtheinstallermenu(seeaccesstotheinstallermenu)
>selectonthescreen>>

• Increaseorreducewiththe buttonstodisplaythe
desiredcorrectionandvalidatewithbutton
.
 

Thisfunctionletsyouadapttheowtemperatureintheheating
system.