Glow-worm Climapro2 RF User Manual

0020094583_02 - 06/11 - Glow-worm
- 4 -
4.2 Hot water heating and cooling
program (**)
• For hot water heating program: press
button
> then select on screen > hot
water > program > set up > choose a day.
• For cooling program : press button
> then select on screen > cooling >
program > set up > choose a day. (NOTE:
HEAT PUMP ONLY)
• Defi ne the time slots with the same
programming principle (see heating
program).
Programming for a day begins at 00:00
with a maximum of 7 time intervals over 24
hours.
(**) Menus available according
to the confi guration of the
system.
4.3 Copy a day
This function lets you apply the rules for
one day to other days.
Once a day has been programmed, you
are automatically returned to the selection
screen of the day to be programmed.
• Select the day to copy
• Copy to the day or group of days of your
choice.
4.4 Override of central heating/hotwater
(available program activated)
This feature allows the temporary override
of current programmes.
• From the main screen, press
.
• Select the program to which the override
will be applied.**
• Set the setting and the end time of the
override.
To cancel:
• From the main screen, press
.
• Select the override(s) to be cancelled.**
(**) Menus available according
to the confi guration of the
system.
HOW TO USE YOUR CLIMAPRO
2
RF
EN

Glow-worm Climapro2 RF Specifications

General

Brand	Glow-worm
Model	Climapro2 RF
Category	Thermostat
Language	English