EasyManua.ls Logo

Glow-worm Flexicom 24cx - Page 13

Glow-worm Flexicom 24cx
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0020127401_00 - 06/11 - Glow-worm
HOW TO USE YOUR APPLIANCE
- 13 -
Filling Tap
Filling Tap
CODE DESCRIPTION POSSIBLECAUSES
F1 Boilerhasattemptedto
light5timesandfailedon
alloccassions
Presstheresetbutton.
Ifthefaultpersists,contactyourInstallation/Servicing
companyorGlow-worm
F5 Overheat Boilerhasoverheated-allowtocoolthenpressresetbutton
F22 Lowwaterpressureor
ignitiontemperaturerise
tooslow
Notenoughwaterinthesystem.
Connectthellingloopundertheboilerandopenbothlling
taps.When1.0barisshownonthedisplay,closetapsand
removellingloop.
Ifthefaultpersists,contactyourInstallation/Servicing
companyorGlow-worm

Other manuals for Glow-worm Flexicom 24cx

Related product manuals