Need help?Do you have a question about the Glow-worm Ultracom 38cxi and is the answer not in the manual?
Immediate actions for gas leaks or fire hazards, and handling of metal parts.
Covers gas category, safety regulations, hazardous substances, and manual handling.
Details compliance with UK and IE regulations for installation and gas supply.
Describes the boiler's design, including integral programmer and controls.
Explains safety features like overheat protection, safety discharge valve, and frost protection.
Highlights the importance of regular servicing and using genuine spare parts.
Provides detailed technical specifications for the 24cxi, 30cxi, and 38cxi models.
Illustrates the boiler's physical dimensions and internal hydraulic layout.
Outlines siting requirements, necessary clearances, and ventilation needs for safe installation.
Details various flue types and their required terminal positioning and clearances.
Explains the boiler's integration into the central heating water system, including expansion vessel.
Covers domestic hot water pressure, hard water areas, and flow rates.
Lists components included in the appliance pack and preparation steps before installation.
Describes how to fix the hanging bracket and safely hang the boiler onto the wall.
Details the correct procedure for connecting gas and water supply pipes to the boiler.
Explains the routing and connection of the safety discharge and condensate pipes.
Provides instructions for installing horizontal telescopic flue systems, including length calculations.
Details the installation of standard horizontal flue systems, covering length and preparation.
Guides through the installation of vertical flue systems, including length and terminal fitting.
Explains the installation of twin flue systems, covering length, preparation, and terminal positioning.
Describes the use of a Plume Management Kit to mitigate the impact of flue pluming.
Covers wiring requirements, system controls, and electrical testing procedures.
Details the step-by-step process for commissioning the boiler, including filling and gas checks.
Provides instructions for converting the boiler from Natural Gas to LPG.
Outlines general inspection and functional checks for boiler servicing.
Provides guidance on diagnosing and resolving boiler faults using codes and diagnostic menus.
Details procedures for accessing and replacing various boiler components.
Lists available spare parts with part numbers for ordering.
Offers recommendations and techniques for safely handling the boiler during installation.
States the boiler's compliance with relevant EU directives and standards.
To Next Page
General