will not be able to access the internet again until you either finish, or stop and reconnect to your
usual Wi-Fi network.
Your Glowforge will begin to calibrate
When you connect successfully, the printer head will center and begin its calibration process
before completing and moving back to the unit’s back left corner.
You Are Connected
Your Glowforge is now connected to the internet and ready to print!
Proofgrade™ Materials
Your Proofgrade Materials
We’re providing a selection of materials from our brand
new Proofgrade materials line, designed specially for your
Glowforge to help you get perfect prints every time. They
come with a protective layer that dramatically improves the
print quality and allows you to draw directly on the material
for use with Trace. Each piece of Proofgrade material has
been labeled with a code that your Glowforge can read,
which tells it exactly which settings to use to produce
pristine cuts and engraves.
Copyright Glowforge, Inc. 2020 36
To Next Page
Loading...