2
Congratulations! You are now the owner of a Gloworm X2.
Prepare to Experience the Revolution in LED Adventure Lighting!
Safety Instructions
An alternative light source should be carried at all times.
Heat Generation
The aluminium light-head is designed to draw heat away from the LED. The
process works effectively when air is flowing over the light. However, the light can
become hot if left stationary on its higher settings. It is recommended that the
light is set to a lower setting when stationary for more than a few minutes.
Important! If the light is being used in a stationary state and it begins to become
hot it will automatically reduce current as a measure to reduce the light’s
temperature and protect the electronic components. Constant operation at high is
only possible with continuous air flow.
Battery Care
• Never leave a battery unattended whilst charging,
• A battery should never be exposed to direct heat,
• Only use the supplied li-Ion charger when charging the battery,
• Batteries do not need to be discharged before charging, frequent charging will not
cause harm to your battery.
• When storing your battery, ensure it is at charged to at least 50% capacity. Store
in a cool dry environment inside an airtight container.
To Next Page
Loading...