4
Quick Start and Operation
Overview
The X2 is operated using the remote switch. Operation of the X2 is through
different types of button press:
CLICK quick press, less than 1 second
DOUBLE CLICK similar to that used with a computer mouse
PRESS 2 to 3 seconds
HOLD hold button in the down position
The X2 is pre-loaded with two default programmes each of which can be
customised to your needs (detailed in the next section). Each programme features
‘Normal Operation Modes’ (NOM) and one ‘Special Mode’ (SM).
Start
Once the battery is connected, the X2 is ready to be used. CLICK to start the
light in TRAIL programme (Default 1). DOUBLE CLICK to start in COMMUTER
programe (Default 2). NOMs (High, Low, etc) are cycled using a CLICK. The SM is
accessed with a PRESS of the switch from any NOM. A CLICK of the switch will
return the X2 to NOM.
To turn off the X2, HOLD the remote switch. The light will cycle through SM, then
it will turn off.
To Next Page
Loading...