GLP Streamer - Using the GLP Streamer Application; Saving Custom Presets

- 9 -
2. Following the instructions at
www.streamer.rocks, run the installation file
to install the application.
Controlling using the GLP Streamer
application
1. Connect your Streamer to your PC or Mac
and start the GLP Streamer application.
2. Click on ADJUST LIGHTS. See G. Move the
sliders, then click on LICHT! to activate.
Saving a custom preset
Presets 1 to 4 are fixed, but you can save your
own custom settings to any preset from 5 to 8.
To save a preset:
1. Connect your Streamer to your PC or Mac
and start the GLP Streamer application.
2. Click on ADJUST LIGHTS. See G.
3. Move the sliders to the values that you want
to store.
4. Click on SAVE PRESET SNAPSHOT and
select a preset from 5 to 8.
5. Click on LICHT! to activate the values and
save them to that preset.