R 22MAR23
PART No.
SHEET
ALL INFORMATION WITHIN ABOVE
BORDER TO BE PRINTED EXACTLY
AS SHOWN ON 8.5 x 11 WHITE 16
POUND
NON-BOND RECYCLABLE
PAPER.
PRINT ON BOTH SIDES,
EXCLUDING TEMPLATES. TO BE
UNITED IN ACCORDANCE
WITH
GMCCA SPECIFICATIONS.
Date Revision Auth DR
Title
Ultium PowerUP Charge Station
User Manual
13DEC22 Fourth Re l SAR
MB
22MAR23
Fifth Re l
SAR
MB
84922762
29NOV22
Third Re l
SAR
AH
13
EN
1. Connect the power cable to the outlet with the NEMA 14-50 plug → restore the power supply to the Ultium PowerUP
Charge Station from the circuit breaker.
When the Ultium PowerUP Charge Station is connected to the outlet, and powered on, ZONES 1 & 2 will fade in and
out.
2. Bluetooth
®
connection:
• Android – Swipe down from the top of the screen → Press “Bluetooth
®
” to activate
• iOS – Go to “Settings” → “Bluetooth
®
” → toggle to activate
• Other operating systems – Refer to the smart mobile device manual to correctly establish the Bluetooth
®
connection
3. For GM vehicle owners, install the GM My Brand App using the following steps:
• Android – On the smart mobile device go to “Play Store” → search for “MyBuick | MyCadillac | MyChevrolet |
MyGMC” → “Install”
• iOS – On the smart mobile device go to “App store” → search for “MyBuick | MyCadillac | MyChevrolet | MyG-
MC” → “Get” → “Install”
• Other operating systems – Refer to the smart mobile device manual to correctly select the App store and install the
MyBuick | MyCadillac | MyChevrolet | MyGMC App
To register a My Brand account and set up the Ultium PowerUP Charge Station, use the following steps:
• Open the MyBuick | MyCadillac | MyChevrolet | MyGMC App → Create a My Brand account, and sign in →
Register the new GM vehicle in the app
• Go to “Homepage” → select “Charge Status” and set up the charger. Alternatively, go to the “More” menu and
select “PowerUP chargers” to set up the Ultium PowerUP Charge Station
• For existing GM vehicle owners, sign into your My Brand account → Go to “Homepage” → select “Charge Status”
and set up the charger. Alternatively, go to the “More” menu and select “PowerUP chargers” to set up the the
Ultium PowerUP Charge Station
5. OPERATING INSTRUCTIONS
• !CAUTION: Where possible to do so, switch off the supply power at the circuit breaker to the Ultium PowerUP
Charge Station before connecting the NEMA 14-50 plug.
To Next Page
Loading...
