Models
• OF77
Inner Shield lens Removal
(Do ONE side at a time)
1. Lower the inner shield lens by pushing the slider (located at the left side of helmet) forward
into the fully open position.
2. As the inner shield lens into the fully open position, pull the inner shield lens out straight
from the helmet eye port (next to the inner shield lens) first. Remove the left side of the
inner shield lens first.
To install the outer shield: reverse the removal process.
Note: The sides of inner shield lens simply snap lens into place, no tools are needed to remove or
install.
Models
• GM54
• GM67
• GM78
Inner Shield lens Removal
1. Lower the inner shield by pushing the slider button located on the top of the helmet
To Next Page
Loading...
