GMC 2012 Acadia - Flash-To-Pass; Headlamp High;Low-Beam Changer

Black plate (2,1)
GMC Acadia/Acadia Denali Owner Manual - 2012
6-2 Lighting
The exterior lamps control has four
positions:
O (Off): Briefly turn to this position
to turn the automatic light control off
or on again.
AUTO (Automatic): Turns the
headlamps on automatically at
normal brightness, together with
the following:
.
Parking Lamps
.
Taillamps
.
License Plate Lamps
.
Instrument Panel Lights
; (Parking Lamps): Turns the
parking lamps on together with
the following:
.
Taillamps
.
License Plate Lamps
.
Instrument Panel Lights
5 (Headlamps): Turns the
headlamps on together with the
following lamps. A warning chime
sounds if the driver door is opened
when the ignition switch is off and
the headlamps are on.
.
Parking Lamps
.
Taillamps
.
License Plate Lamps
.
Instrument Panel Lights
# (Fog Lamps): Turns on the fog
lamps (if equipped).
See Fog Lamps on page 6‑5.
Headlamp High/
Low-Beam Changer
2 3
Headlamp High/Low‐Beam
Changer: Push the turn signal/lane
change lever away from you to turn
the high beams on.
Pull the lever toward you to return to
low beams.
This indicator light turns on in the
instrument panel cluster when the
high‐beam headlamps are on.
Flash-to-Pass
This feature is used to signal to
the vehicle ahead that you want
to pass.
If the headlamps are off or in the
low‐beam position, pull the turn
signal lever toward you to
momentarily switch to high beams.
Release the lever to turn the
high-beam headlamps off.