Tire Inspection and Rotation
Tires should be rotated every 5,000 to 8,000 miles
(8 000 to 13 000 km).
Any time you notice unusual wear, rotate your tires as
soon as possible and check wheel alignment. Also
check for damaged tires or wheels. See
When It Is Time
for New Tires on page 5-69
and
Wheel Replacement
on page 5-73
for more information.
Make sure the spare tire is stored securely. Push, pull,
and then try to rotate or turn the tire. If it moves,
use the ratchet/wheel wrench to tighten the cable. See
Changing a Flat Tire on page 5-76
.
The purpose of regular rotation is to achieve more
uniform wear for all tires on the vehicle. The first rotation
is the most important. See
Scheduled Maintenance
on page 6-4
.
When rotating your tires, always use the correct rotation
pattern shown here.
Do not include the spare tire in your tire rotation.
After the tires have been rotated, adjust the front and
rear inflation pressures as shown on the tire and loading
information label. See
Loading Your Vehicle on
page 4-48
and
Inflation - Tire Pressure on page 5-67
,
for more information. Make certain that all wheel
nuts are properly tightened. See “Wheel Nut Torque”
under
Capacities and Specifications on page 5-114
.
5-68
To Next Page
Loading...
