Problem Recommended Action
I ejected the disc and tried
to take it out, but it was
pulled back into the slot.
Eject the disc again.
The language in the
audio or on the screen is
wrong.
Press and hold the
COMP/AUDIO button on
the remote. This will
access the DVD’s main
menu. Then follow the
prompts.
The remote does not
work.
Point the remote directly
at the player, but not the
screen.
The batteries could be
dead or put in wrong.
If the power button on the
player is flashing, the
parental control is on,
which disables the
remote.
Problem Recommended Action
I can not hear anything
when I lower the volume.
Quickly press and release
the COMP/AUDIO button
on the remote. This tells
you the current default
setting. Press and
release the
COMP/AUDIO button
again to choose another
setting.
How do I get subtitles on
or off?
Press and hold the
DISP/S-TITLE buttons on
the remote to go to the
DVDs main menu. Then
follow the prompts.
After stopping the player,
I push PLAY but
sometimes the DVD
starts where I left off and
sometimes at the
beginning.
Press the STOP button
on the remote to resume
where the DVD left off.
Press the STOP button
twice to start the DVD at
the beginning.
If the power is off and the
DVD is still in the player,
press and release the
PLAY button.
3-101
To Next Page
Loading...
