16
DC overload cut out
IMPORTANT. Exceeding the rated capacity of your
generator can result in serious damage to your generator
and connected apparatus.
1. The DC circuit has a circuit breaker to protect the
generator from over loading.
2. If the circuit breaker trips, unplug all electrical apparatus
from the generator.
3. Let the overload cut out switch cool down.
4. Press the DC reset button (5). Commence to start your
generator accordingly.
5. When re connecting appliances, reduce the load to that
which previously overloaded the generator.
Generator maintenance
Your generator should be kept clean and dry at all times.
The generator should not be stored or operated in
environments that includes excessive moisture, dust or any
corrosive vapours. If these substances are on the generator,
clean with a cloth or soft bristle brush. Do not use a garden
hose or anything with water pressure to clean the generator.
Water may enter the cooling air slots and could possibly
damage the rotor, stator and the internal windings of the
generator head.
To Next Page
Loading...
