5.
To tighten the belt, feed the shoulder belt back into the
retractor while you push down on the child restraint.
If you’re using a forward-facing child restraint, you may
find it helpful to use your knee to push down on the
child restraint as you tighten the belt.
6.
Push and pull the child restraint in different directions
to be sure it is secure.
To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety
belt will move freely again and be ready to work for an
adult or larger child passenger.
Securing a Child Restraint in the
Right Front Seat Position
If your child restraint is equipped with the LATCH
system, see Lower Anchorages and Top Tethers for
Children (LATCH System) on page 1-44. See Top Strap
on page 1-41 if the child restraint has one.
1-48
To Next Page
Loading...
