Technology for safety
3
D1000 series - Intrinsically Safe Isolators
Mechanical features
Enclosure Characteristics
High channel density result from innovative circuit design using advanced surface mount components.
Single, dual or quad channel models.
Plug-in screw terminal blocks to secure termination up to 2.5 mm
2
.
Plug-in PCB can be removed for service or maintenance operations (see section “Front Panel and PCB Removing”).
High packing density
35 mm (Top Hat) DIN-Rail.
Ultra slim 4 channels 22.5 mm wide DIN-rail mounting modules.
6 mm per channel.
Up to 176 I/O channels per meter of DIN-rail.
Power Bus enclosure allows a significant reduction in cables, costs and space.
Front Panel and
Terminal Blocks tagging zone
Laser engraving on entire enclosure
to provide Intrinsic Safety parameters,
schematic diagrams, connections,
instructions
Aeration
Slots
Mounting
T35 DIN Rail according to EN50022
Dimensions
Width 22.5 mm
Depth 99.0 mm
Height 114.5 mm
Case material
PA66 - Polyamide (Nylon) 66
Blister packing size
Width 30.0 mm
Depth 120.0 mm
Height 120.0 mm
Terminals
Identification
LEDs for power,
status and fault
indication
To Next Page
Loading...
Need help?
General
